Sneeze Guard Shielding for Shuttle Vehicles

Click image to enlarge


The shields are made of clear shatter resistant polycarbonate to comply with the Ministry of Transport requirements for polymers in public transportation vehicles.


Full consideration is made so as not to interfere with driver view, air bag deployment, seat travel and the function of the passenger heat or cooling.


Cleaning tips:
The best method to keep your sneeze guard clean and ‘looking like new’, is to clean it when necessary with a dilute solution of liquid dish soap (e.g. ‘Dawn’, 1:50 in cold water). Ammonia based cleaners are not recommended.Using a spray applicator apply a thin film of the soapy solution, gently wipe with a damp cloth and follow up with a dry cloth.Always with a slow circular motion so as to generate as little static electricity as possible.Only use ‘100% cotton’ cloths (an old ‘T’ shirt) applying as little pressure as required.

Paper toweling (after all, they’re wood) and ‘plastic’ cloths (e.g polyester, nylon, rayon etc.) should be avoided.

Powered by Wordpress